WE BUY & SELL NEW & USED TOYS
Cart 0

Westrock Racing Machines Sprint Car Kit

$65.00

Westrock Racing Machines Sprint Car Kit

LASERCUT 1.2MM BRASS PRE-BENT + KIT INCLUDES PIN TUBES,

BODY PANELS, WING KIT & 3D PRINTED TAIL-TANK

The WestRock Sprint Car chassis has been designed for realistic appearance, to be strong and to simplify the building process.

 - Nerf and push bars are part of the laser cutting process so you don’t have to bend any wire.  Brass tubing (supplied) is soldered in various places to lock it all together.

  - The motor is positioned to allow bigger gears to be used for those real low ratios that suit more powerful motors.  (eg. Sonic drag racing 62 tooth crown gear can be used).

 - Motors can be screwed and/or soldered in place.

 - The chassis will accept a typical wood track style guide as the hole is 3/16".

  - The front axle holes are cut to 3/32" so a tube can be fitted with 1/16" wire inserted to be the axle if running 1/16" front wheels.  A 3/32" axle can be used for the front wheels or the holes can be drilled for a 1/8 axle or to suit 3/16" if bushes are required.

 - Rear axle holes are 3/16" and designed to use 3/32 bushes but can be drilled bigger if a 1/8 axle is used.

 - Chassis clearance is approx. 3.5mm if using the recommended wheels sizes. 1-1/16" fronts with 1-3/16" rears, 1-5/16" will also fit.

 - The high quality 3D printed tank cover is held in place with a supplied screw that is hidden from view.

 - The body and wings come as a ‘flat-pack’ with interlocking slits for alignment and require glue to be held together.  The top wing is mounted at the sides of the roll cage or it can be omitted to make it easy to build a midget or USAC style car.  The front wing mounts are part of the body and can easily be removed if required.


These kits have been designed with the builder in mind and to make it as easy as possible to get a great result within a short time frame.

Parts supplied are as per image two

 



More from this collection